Mini Mine Loaders

EziTite A2 Dedicated Series EziJac

The EziJac Stud Tensioner utilizes the power of hydraulic pressure to easily produce the forces necessary to effectively  tension bolts and studs. Once the EziJac is in place, screwed onto the bolt’s thread over the standard nut, the required pressure is applied to stretch the bolt to its recommended preload, and the nut screwed down to retain the load. The pressure is relieved, the EziJac removed and is ready to use again. EziJac Dedicated Thread Stud Tensioners provide the answer to many of the fitting problems associated with using larger tensioning equipment. They are also ideal for single task applications which do not require interchangeability of thread sizes. Any number of EziJacs can be interlinked to provide even amounts of simultaneous tension over multiple studs or bolts as required. Produced from high strength alloy steel, EziJac Stud Tensioners are made in standard configurations. They can also be made to suit the requirements of a specific application.

Features:

• Reduces maintenance down time.
• Improves safety on the job by eliminating hammer tightening.
• Gives reliable and precise tensioning.
• Is user friendly – fast to fit and remove.
• Requires little physical effort.
• Is ideal for confined spaces or difficult locations.
• Multiple tensioning for leak-free flange makeup.

Suitable for:

The EziTite® is suitable for use where:

• Accurate and reliable loading is required on bolting.
• Vibrational or torsional stresses are a problem.
• Regular maintenance requires repeated adjustment or removal of nuts.
• There are confined and difficult nut locations.
• Simultaneous tightening of bolts is required (eg: Flanges)
• No torque means used (eg: Foundation Bolts)

Operation

Although smaller and lighter than many competitive types, EziJac Stud Tensioners are capable of high application forces. The higher forces generated by EziJac devices permit their use with bolts of very high tensile strength, for example, in bolting of highly stressed assemblies or those prone to destructive vibration.

Operation of EziJac at typical lower charge pressures requires less use of costly pumping equipment, and with an improved degree of safety. All EziJac tensioners are designed to use seals which can be easily replaced in minutes, eliminating expensive repairs.